Limei Flooring Products (Guangdong) Co., Ltd.

Site title

Clear records

history record

Clear records

history record

cancel

Clear records

history record

Current position：

News

Contact details

Manager Huang

18024330488

57815893@qq.com

No. 7 Xinxing North Road, Luosha Community, Guancheng Street, Dongguan City, Guangdong Province

Related suggestion

Sports wooden flooring installation

Before installation, thoroughly check the site, including the sub - floor for unevenness, cracks, and moisture. Ensure the area is clean, sized appropriately, and measure accurately to calculate material needs.

2025-06-10 14:53:1610

 Preparation

Site Inspection

Before installation, thoroughly inspect the installation site. Check for any unevenness, cracks, or moisture issues on the sub - floor. Ensure that the area is clean, free from debris, and has appropriate dimensions. Measure the length and width of the space accurately to calculate the amount of flooring materials required.

Material and Tool Collection

Gather all the necessary materials, including sports wooden floor planks, adhesives, underlayment, and accessories. Prepare tools such as a tape measure, saw, hammer, nails, and a floor - laying machine. Make sure the tools are in good working condition.

Installation
Sub - floor Treatment
If the sub - floor has any imperfections, repair them immediately. For an uneven sub - floor, use a leveling compound to create a flat surface. Apply a moisture barrier to prevent moisture from seeping through to the wooden floor.
Underlayment Installation
Lay the underlayment evenly across the sub - floor. The underlayment provides additional cushioning, reduces noise, and helps with thermal insulation. Secure it in place using staples or adhesive.
Flooring Installation
Start from one corner of the room. Place the first plank against the wall, leaving a small expansion gap (about 10 - 12mm) to allow for natural expansion and contraction of the wood. Use the tongue - and - groove system to connect the planks. For areas that require cutting, measure and cut the planks accurately using a saw. As you progress, use a tapping block and mallet to ensure a tight fit between the planks.
Finishing
Edge Trimming
Once the flooring is laid, trim the edges to fit the room perfectly. Use a sharp utility knife or a saw to make clean cuts.
Gap Filling
Fill any remaining gaps between the planks and along the edges with a matching filler. This not only improves the appearance but also prevents dust and debris from getting trapped.
Surface Polishing
Finally, polish the surface of the sports wooden floor. Apply a suitable floor finish to enhance its durability and give it a shiny, professional look.